NOVITANE KELVAR CORD REINFORCED FOOD GRADE
CONVEYOR BELTING
SPECIFICATION DATA:
| FG-90/85 K(8) |
FG-90/95 K(8) |
FG-BLU-90/85 K(8) |
|
| Reinforcement |
Kevlar Cord | Kevlar Cord | Kevlar Cord |
| Tension Rating (PIW) | 90 | 90 | 90 |
| 1% Elongation (PIW) | 90 | 90 | 90 |
| Maximum Belt Width | 48" | 48" | 48" |
| Random Slab Length | 500' | 500' | 500' |
| Overall Thickness | 1/8" | 1/8" | 1/8" |
| Colors | Clear | Clear | Blue |
| Cover Durometer(Shore A) | 85 | 95 | 85 |
| Minimum Pulley Diameter * | 2" | 3" | 2" |
| Weight Per Foot (PIW) | .068# | .068# | .068# |
| Temperature (Deg.F) |
-10 | 0 | -10 |
| Maximum | 175 | 175 | 175 |
| Coefficient of Friction |
.70 | .60 | .70 |
| Bottom Cover | .50 | .40 | .50 |
| Meets FDA | Yes | Yes | Yes |
| USDA Approved | Yes | Yes | Yes |
| Mechanical Fasteners |
#1T | #1T | #1T |
| Clipper | #U1 | #U1 | #U1 |
NOTE: Due to the very low elongation and transverse stiffness characteristics of NOVITANE belting, the crowning of pulleys should be minimal. With either a straight taper crown or a cyclinderical center section crown, a maximum of .030" per foot of face taper is recommended.
V-Guides: Use only notched V-guides.
HEAT-WELDED ENDLESS SPLICING (click here for instructions)
| Back |
| Sheeting |
| USDA Belting |
| Tough Stuff |
| Fabrication |
| Splicing
| Home Page |
| Contact Us On-Line |